GE ZGG48L31, ZGG48N31, ZGG48N30, ZGG48L30 Questions? Use this problem solver, The Problem Solver

Models: ZGG27L20 ZGG36L31 ZGG27N21 ZGG24L20 ZGG27L21 ZGG36L21 ZGG48N40 ZGG36L20 ZGG48N42 ZGG36L30 ZGG36N30 ZGG36N31 ZGG48L40 ZGG27N20 ZGG48L31 ZGG36N20 ZGG36N21 ZGG48L42 ZGG48L30 ZGG48N30 ZGG48N31

1 32
Download 32 pages 27.89 Kb
Page 27
Image 27

Questions?

Use this problem solver!

 

 

The Problem Solver

 

 

 

 

 

 

Stainless Steel Outdoor Cooking Center

 

 

 

 

 

 

PROBLEM

POSSIBLE CAUSE

 

 

 

 

 

 

GRILL WON’T LIGHT

• Check to see if other burners on the unit operate.

 

WHEN THE ROTARY

• Remove the grill rack and the stainless steel radiant tray, and watch

 

IGNITER IS TURNED

 

the igniter tip. You should see a spark jump from the tip of the

 

 

 

 

igniter when the knob is turned. If there is a spark, then check to

 

 

ensure there is gas supplied to the unit.

 

 

• Use a match to light the burner. (See the “To light the grill” section).

 

 

• Visually check the electrode and wire while turning the igniter.

 

 

The only place a spark should appear is at the electrode tip.

 

 

If the electrode or wire leaks voltage, remove and replace.

 

 

• Purge the gas line of any air.

 

 

• Check the brass orifice for blockage.

 

 

• Inspect the igniter tip to make sure it is clean and free from debris.

 

 

Clean the area. Readjust for 1/8″ gap.

 

 

 

 

 

 

BURNER FLAME IS

• Check the burner inlet for obstructions.

 

YELLOW OR ORANGE

• Check the air shutter for proper adjustment.

 

IN CONJUNCTION

(See the “Installation Instructions”).

 

WITH THE ODOR

 

• Placement of the cooking center is important for proper burner

 

OF GAS

 

operation. Do not place the cooking center in a dusty area.

 

 

 

 

 

 

 

 

LOW HEAT WITH

• Inspect the fuel hose to ensure it is not bent or kinked.

 

CONTROL KNOB IN

• Adequate gas supply may not be available. Check to make sure there

 

THE HI POSITION

 

is gas in the LP tank (if included).

 

 

 

 

• If it is only one burner that appears low, the burner or burner orifice

 

 

may need cleaning.

 

 

• The air shutter may need adjustment.

 

 

• Preheat the grill for 15 minutes with the lid closed.

 

 

 

 

 

 

ROTISSERIE BURNER

• Check for a spark at the igniter.

 

WON’T LIGHT

• Use a match to light the burner.

 

(on some models)

 

 

 

 

 

 

 

 

 

 

OPTIONAL

• Readjust the thermocouple so that it is not bent or kinked, but

 

ROTISSERIE LIGHTS

lies flat against the burner.

 

BUT WILL NOT HOLD

• Hold the safety valve button in until the burner remains lit.

 

FLAME ONCE

 

 

 

 

BUTTON IS RELEASED

 

 

 

 

(on some models)

 

 

 

 

 

 

 

 

 

THE GRILL BURNER

• The burner may be upside down. Rotate the burner 180° and

 

WILL NOT SIT LEVEL

reinstall. Make sure it is secure and level.

 

INSIDE THE GRILL

 

 

 

 

BOX

 

 

 

 

 

 

 

 

27

Page 27
Image 27
GE ZGG48L31, ZGG48N31, ZGG48N30, ZGG48L30, ZGG48L42, ZGG36N21, ZGG36N20 Questions? Use this problem solver, The Problem Solver