![STEP 4 CONNECT POWER](/images/new-backgrounds/68136/6813615x1.webp)
Installation Instructions
STEP 4 CONNECT POWER
•Connect power cord plug to a properly grounded receptacle.
•Check to make sure power is on by opening a drawer to see if interior light turns on.
•The interior fan runs all the time except when a drawer is open.
See the Owner’s Manual for further explanation of the fan.
STEP 6 SET TEMPERATURE CONTROLS
•The temperature controls are preset. Refer to the Owner’s Manual for more information. Allow
NOTE: The
STEP 5 SLIDE PRODUCT INTO
THE CUTOUT
CAUTION: Do not push against the drawer panels with your knees. Do not push or lift the unit by the drawer handles. Damage may occur!
ATTENTION : Ne poussez jamais les panneaux de tiroir avec vos genoux. Ne poussez jamais votre appareil ou ne le soulevez jamais par les poignées de tiroir. Vous pouvez l’endommager.
•Open one of the drawers and gently push the unit back into the opening with your hands against the sides. Be careful not to entangle power cord.
•Check again to be sure the unit is level. Adjust the leveling legs until the unit is resting firmly against the bottom of the counter to prevent rocking or movement during operation.
•If alignment with adjacent cabinetry is an issue, use a shim to secure the unit against the underside of the countertop.
NOTE: While performing installations described in this book, safety glasses or goggles should be worn.
For Monogram® local service in your area, call 1.800.444.1845.
NOTE: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance and specifications are subject to change without notice.
Pub. No.
Part No. 197D5893P003
Printed in Slovenia
GE Consumer & Industrial
Appliances
General Electric Company Louisville, KY 40225 ge.com