Installation
Finalize installation
Caution: Do not lift oven or oven door by handle. Door glass breakage or handle damage may occur. Glass surface of door face extends beyond door frame on each side; be careful not to impact this exposed glass.
Caution: When door is removed and hinge arms are at stop position, do not bump or try to move hinge arms. Hinges could snap back, causing an injury to hands or damage to porcelain surface.
Remove oven door:
•Open the door to stop position.
•Grasp each side of door, lifting up and off the hinges.
•Cover hinges with toweling while working in oven area.
Note: The lower front trim is packed separately and should not be attached until the oven is installed and secured to the installation opening.
Install lower oven trim
•Secure lower front trim to the front frame with 3 Phillips head screws provided.
•Secure trim to the side trim with 2 #20 torx head screws as illustrated.
CAUTION 
The bottom trim provides an opening for cooling air to enter the cabinet. This opening should never be blocked.
Route | Note: It is best that 2 people |
cable | perform this step: one to hold |
through | oven in position and one to feed |
cutout | cable. |
With oven in front of cabinet opening:
•Start feeding the flexible power cable through cutout.
•Insert oven 3/4 way into cabinet opening. Continue to feed flexible power cable while sliding oven into place. This is to insure that the flexible power cable will not get trapped between the back of the oven and the back of the cabinet wall.
CAUTION 
Be sure you do not tip the unit forward during installation or you may bend the Lower Side Trim.
17 |
