GE ZEK737WW Cabinetry, Built-In Ovens, Tools and materials required Framed cabinet double oven

Tools and materials required

Framed cabinet double oven

		Cabinetry
				Built-In Ovens
•	2" x 4" lumber for runners	Ovens are designed for installation in a cabinet 27" min. wide.
•	Saw	•	Cut 2" x 4" runners of appropriate length or solid shelf to
•	Level		support oven.
•	Phillips screwdriver and wood screws or other hardware for	•	Attach runners or solid shelf in opening as shown.
	installing runners or shelf to support oven.	•	Runners must be level and rigidly mounted.

	Front Framed	Front Framed Full
		Overlay Door
	Partial Overlay Door
	DIMENSIONS
A	Cabinet Width	27" Min.
B	Cutout Width	25 " Min.
C	Cutout Height	49-11/16" Min./50-1/8" Max.
D	Cutout Depth	23-5/8" Min.
E	Cutout Location	13-1/4" Min.
H	Overall Height	50-3/4"
W	Overall Width	26-13/16"

Use the information in this dimension drawing for typical framed cabinets. The front face of the oven will be flush with cabinetry doors or drawers.

Order a double oven cabinet.

Rough opening for double oven must be:

•Depth—23-5/8" min. from inside back to front of cabinet frame.

•Width—25" min.

•Height—49-11/16" min. 50-1/8" max.

•Installing 13-1/4" from floor will place base of upper oven at countertop level.

–May be more than 13-1/4" from floor, depending upon user preference.

•All Monogram ovens require 7/8" overlap to both sides and bottom. Allow 1/4" min. for top overlap.

•Oven overlaps will conceal all raw edges.

6