Questions? Use this problem solver!
|
| The Problem Solver |
| ||
|
|
|
|
|
|
|
| Stainless Steel Outdoor Cooking Center |
| ||
|
|
|
|
| |
| PROBLEM | POSSIBLE CAUSE |
| ||
|
|
|
|
| |
| GRILL WON’T LIGHT | • Check to see if other burners on the unit operate. |
| ||
| WHEN THE ROTARY | • Remove the grill rack and the stainless steel radiant tray, and watch |
| ||
| IGNITER IS TURNED |
| |||
| the igniter tip. You should see a spark jump from the tip of the igniter |
| |||
|
|
| |||
|
| when the knob is turned. If there is no spark check to ensure there is |
| ||
|
| gas supplied to the unit. |
| ||
|
| • Use a match to light the burner. |
| ||
|
| • Visually check the electrode and wire while turning the igniter. |
| ||
|
| The only place a spark should appear is at the electrode tip. If the |
| ||
|
| electrode or wire leaks voltage, remove and replace. |
| ||
|
| • Purge the gas line of any air. |
| ||
|
| • Check the orifice for blockage. |
| ||
|
| • Inspect the igniter tip to make sure it is clean and free from debris. |
| ||
|
| Clean the area. Readjust for 1/8″ gap. |
| ||
|
|
|
|
| |
| BURNER FLAME IS | • Check the burner inlet for obstructions. |
| ||
| YELLOW OR ORANGE | • Check the air shutter for proper adjustment. |
| ||
| IN CONJUNCTION | • Placement of the cooking center is important for proper burner |
| ||
| WITH THE ODOR |
| |||
| operation. Do not place the cooking center in a dusty area. |
| |||
| OF GAS |
| |||
|
|
|
|
| |
|
|
|
|
| |
| LOW HEAT WITH | • Inspect the fuel hose to ensure it is not bent or kinked. |
| ||
| CONTROL KNOB IN | • Adequate gas supply may not be available. Check to make sure there |
| ||
| THE HI POSITION |
| |||
| is gas in the LP tank. |
| |||
|
|
| |||
|
| • If it is only one burner that appears low, the burner or burner orifice |
| ||
|
| may need cleaning. |
| ||
|
| • The air shutter may need adjustment. |
| ||
|
| • Preheat the grill for 15 minutes with the lid closed. |
| ||
|
|
|
|
| |
| ROTISSERIE BURNER | • Check for a spark at the igniter. |
| ||
| WON’T LIGHT | • Use a match to light the burner. |
| ||
| (on some models) |
| |||
|
|
|
|
| |
|
|
|
|
| |
| OPTIONAL | • Readjust the thermocouple so that it is not bent or kinked, but |
| ||
| ROTISSERIE LIGHTS | lies flat against the burner. |
| ||
| BUT WILL NOT HOLD | • Hold the safety valve button in until the burner remains lit. |
| ||
| FLAME ONCE |
|
|
|
|
| BUTTON IS RELEASED |
|
|
|
|
| (on some models) |
|
|
|
|
|
|
|
|
|
|
If you need more help…call, toll free: GE Answer Center® 800.626.2000
consumer information service
20
