Care and Cleaning
Stainless Steel Range
Oven light
NOTE: The glass cover should be removed only when cold. Wearing latex gloves may offer a better grip.
The light bulb is located on the back of the oven. Before replacing the bulb, disconnect electrical power to the range at the main fuse or circuit breaker panel.
Let the bulb cool completely before removing it. For your safety, do not touch a hot bulb with a damp cloth. If you do, the bulb will break.
To remove:
Turn to remove the cover, then remove the bulb.
To replace:
Put in a new
Install and tighten the cover.
Reconnect electrical power to the range.
Socket
Bulb
31⁄2″ Max. length
Glass cover
Broiler pan and grid
After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container. Wash and rinse the broiler pan and grid in hot water with a
If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove
The broiler pan may be cleaned with a commercial oven cleaner. The grid is chrome; do not use an oven cleaner to clean it.
Both the broiler pan and grid can also be cleaned in the dishwasher.
Do not store a soiled broiler pan and grid anywhere
in the range.
Stainless steel
Do not use a steel wool pad; it will scratch the surface.
Clean with hot soapy water. Rinse and dry.
If food soil remains, try a general kitchen cleaner, such as Fantastik®, Simple Green® or Formula 409®.
For hard to clean soil use a standard stainless steel cleaner such as
After cleaning, use a stainless steel polish such as Stainless Steel Magic®.
22
