Standard

Appearance

Panel

Options

Custom

Panels

Option #1

Option #2

Installation Preparation

Built-In Compactors

The Monogram compactor models ZCG3300 and ZCG3100 come with a white/black reversible aluminum front drawer panel. Model ZCG3300 is shipped with the white panel showing and model ZCG3100 with the black side showing. The panels

on both models can be reversed to reveal the opposite color side. The ZCG3500 comes with a stainless steel wrapped panel.

Go to Step 7, page 12. Follow procedure A for reversing door panel color if desired.

Monogram compactor models ZCG3300 and ZCG3100

You can:

are designed to accept a custom front drawer panel to

• Install a 1/4" thick custom panel

match the surrounding cabinetry.

• 3/4" thick custom panel

 

• 3/4" thick custom panel and custom handle

 

 

1/4" Thick Wood Panel

 

 

• Cut panel 11-11/16" wide, 24-1/2" high. The custom 1/4" thick panel replaces the white/black aluminum panels and cardboard filler. The custom panel will slide into the trim on the drawer front, concealing raw cut edges.

Go to Step 7, page 12. Follow procedure B for installation.

3/4" Thick Wood Panel

Cut panel 12" wide x 24-3/4" high.

The custom 3/4" thick panel replaces the

white/black aluminum panel. Cut edges will be seen and must be finished for best appearance. Both the trim and drawer front panel will be removed to make this installation.

Go to Step 7, page 12. Follow procedure C for installation.

Note: 3/4" thick door panels, both raised and flat design, should be constructed in the same manner as typical cabinet doors. Order the 3/4" custom door panel from the cabinet manufacturer. Be sure to provide the exact dimensions so that the panel is constructed accurately.

4

Page 4
Image 4
GE Monogram ZCG3100, ZCG3500, ZCG3300 installation instructions Installation Preparation, Thick Wood Panel