Installation
Provide
Support
Built4n
hl, stallation
2 7" Models
All Outdoor Cooking Centers can be installed
on a cart designed specifically for that model
size. Follow the installation instructions
provided with the carts to install. Proceed to
(;as supply to complete the installation.
•All models may be installed into a
combustible or
•Combustible enclosures require tile use of
an insulated jacket. Insulated jackets are
available as a optional accessory. Order tile specific type flw yore" model.
Clearalces
•Allow 3" at tile rear t0r lid clearance.
•Allow at least 12" clearance at tile back of tile
ZX27TKYSS Trim Kit
This kit is designed for both combustible and
conceal tile gap at tile rear and both sides of tile opening.
•Secm'e trim to tile sides and back with screws provided.
•Place tile grill into tile enclosm'e.
| 12" Min. to |
Install Electrical | Combustibles |
Outletfor Rotisserie | Clearance |
on LeftSide | for Lid |
(6.5AMP Min.) |
|
| I/2" |
| 4x4Opening |
| pply |
| Line |
| Openingfor |
AccessDoors |
27" wide models:
Installation in a non-combustible enclosure.
• In a | (I//asonry) | enclosure, |
tile grill drops into tile opening. A deck or
ledge on each side is required for support fl'om tile bottom.
Outdoor Cooki_g Center,_
(:AUTION: The grill is heavy. 2 people are
required to lift and place tile grill into tile cart or tile enclosure.
grill when exhaust is directed to a window or a s/irfilce that is diflictflt to clean.
•Allow at least 6" clearance on each side to
anv
Rotisserie models also req tfire 6" clearance
tot placing and handling tile motor and skewer.
•Allow at least 12" clearance on each side and
rear to combustible vertical materials.
NOTE: | This | trim kit | is not | designed | to | |
support | tile | weight | of | tile | grill. Tile | grill must |
be supported | fl'om | tile | bottom. |
| ||
|
|
|
|
|
| 12"Min. to |
Install Electrical |
|
|
| Combustibles | ||
|
|
| Clearance | |||
Outletfor Rotisserie |
|
|
| for Lid | ||
on LeftSide |
|
|
|
|
(6.5AMP Min.)
Opening for GasSupply Line
peningfor
27" wide models:
Installation in a combustible enclosure.
ZX27JYSS insulated jacket is required
• Tile insulated jacket must be supported from
tile bottom by a solid deck or ledge on each
side beneath the jacket.
•Consti uct tile enclosure as shown and place
tile insulated jacket into tile enclosm'e. Place tile cooking center into the jacket. No
installation hardware is required.
7