Design Information
Stainless Steel G a s Cooktop
Advance planning installation options
Cooktop and ZVB36 Downdraft Vent Combination Installation. See page 9.
These cooktops may be installed with a 36" Monogram Downdraft Vent, models ZVB36. See page 9 for cutout and clearances.
–The countertop must have a deep flat surface to accommodate the combined installation of the cooktop and vent.
–The downdraft vent with blower, motor and ductwork will occupy the base cabinet.
–Consideration must be given to electrical and gas supply locations. See page 6.
–Read the Downdraft Vent Installation Instructions packed with the product, or to review ahead of time, order Pub. No.
Cooktop and ZTD910 Warming Drawer Combination Installation. See page 10.
These cooktops may be installed over a Monogram 30" Warming Drawer, models ZTD910. See page 10 for cutout and clearances.
–Consideration must be given to electrical and gas supply locations. See page 6.
–Read the Warming Drawer Installation Instructions packed with the product, or to review ahead of time, order Pub. No.
Cooktop and ZET837 Single Oven Combination Installation. See page 11.
These cooktops may be installed over a Monogram 30" Oven, model ZET1038. See page 11 for cutout and clearances.
–Consideration must be given to electrical and gas supply locations. See page 6.
–Read the 30" Oven Installation Instructions packed with the product, or to review ahead of time, order Pub. No.
Tools and
Materials
Required
• Gas pressure | • Saw | • 1/2" NPT x 3/4" | • 5 foot |
regulator (supplied) | • Carpenter’s square | I.D. or 1/2" I.D. | flexible metal |
• 90° street elbow | • Pipe wrench | flare union adaptor | appliance |
(supplied), may be | • Manual gas line | for connection to | connector, 3/4" or |
required with a | regulator | 1/2" I.D. to match | |
downdraft vent | • 3/4" NPT x 3/4" | • | gas supply line: |
combination | I.D. or 1/2" NPT x | joint sealant | – If required by local |
installation. | 1/2" I.D. flare |
| codes, use solid |
• Wok ring (accessory | union adaptor for |
| pipe with fittings. |
supplied on some | connection to |
|
|
models) | supply line |
| NOTE: Purchase |
|
|
| new flexible line, |
|
|
| DO NOT USE OLD, |
|
|
| PREVIOUSLY USED |
|
|
| FLEXIBLE LINE. |
4