Care and Cleaning

Gas Cooktop

Dual-flame spill-proof burners

The burner consists of three parts: the burner base, burner head and burner cap. The burner head and burner cap can be lifted off, making them easy to clean.

CAUTION: DO NOT OPERATE THE BURNER WITHOUT ALL BURNER PARTS IN PLACE.

You should clean the surface burners routinely, especially after bad spillovers, which could clog the slots and holes in the burner heads. A sewing needle or wire twist-tie works well to unclog these openings.

All slots and holes in the burner head must be kept clean at all times for proper ignition and an uneven, unhampered flame.

The electrode is locatedElectrode on one side of each burner.

When one burner is “ON”, all burners will spark. Do not attempt to disassemble

or clean around any burner while another burner is on. An electric shock may result, which could cause you to knock over hot cookware.

Cleaning

Lift off burner parts only when cool (see next page). Wash in hot, soapy water. You may use a plastic scouring pad to remove burned-on food particles.

To remove burned-on food, soak the burner heads in a solution of mild liquid detergent and hot water for 20–30 minutes. For more stubborn stains, use a plastic scouring pad or toothbrush.

If the spill goes inside the burner head assembly, wash it under running water and shake to remove excess water.

After Cleaning

Before replacing the burner parts, shake out excess water and then dry them thoroughly.

12

Page 12
Image 12
GE Monogram ZGU384L owner manual After Cleaning