Care and Cleaning
Gas Cooktop
Dual-flame spill-proof burners (cont.)
To remove the burner parts:
NOTE: Before removing the burner parts, remember their size and location. Replace them in the same location after cleaning for proper burner operation.
1.Turn all controls OFF before removing any burner parts.
2.When cool, you may lift off the burner grates, burner caps and burner heads for easier cleaning. Do not remove the burner bases.
To replace the burner parts:
Make sure that the burner parts are replaced in the correct location.
Medium | Medium |
Burner | Burner |
1.Replace the burner head on top of the burner base, making sure that the hole in the burner head is properly aligned with the electrode in the burner base. A small gap between the base and head is normal.
Burner cap
Burner head
| Burner |
Electrode | base |
| Burner Assembly |
2.Place the burner cap on top of the burner head. Make sure that the burner cap is properly seated on the burner head.
Large | Medium |
Burner | Burner |
On model ZGU384, there is one large burner head and burner cap and three sets of medium burner heads and burner caps.
Medium | Large | Medium |
Burner | Burner | Burner |
Burner cap properly seated
Burner cap not properly seated
Burner Cap Alignment
Medium | Medium |
Burner | Burner |
On model ZGU385, there is one large burner head and burner cap and four sets of medium burner heads and burner caps.
These burner parts are not interchangeable.
13
