Models Available
| Design Information |
| |
|
|
|
|
| Warming Drawer |
| |
|
|
| |
ZTD910 | The warming drawers may be installed |
| |
30” Wide model | directly into a wall or wall oven cabinetry, |
| |
ZKD910 | or below a countertop. |
| |
27” Wide model |
|
|
|
Product Dimensions
27" | ||
Drawer | 9" | |
Open | ||
| ||
1" | 26" | |
| Including | |
| Handle |
A
Dimension A
ZTD910 30” ZKD910
Accessories
ZXD27B, ZXD30B – This kit provides for the installation of a custom front panel on 27" and 30" black and white wide models.
NOTE: The original drawer front will be removed and discarded when this kit is used. The tubular handle can be reinstalled onto the custom panel with longer screws (not provided). Or, the original handle can be replaced with a custom handle of your choice. (Handle is not supplied.) Choose a custom handle to match or complement cabinetry hardware.
JXPN2 – Warming drawer pan kit. This kit includes supports and one full size and one half size pan with lids. The pans fit 27" and 30" wide models.
Tools and
Materials
Required
•Wood screws and adhesive or other hardware for installing runners or shelf to support warmer drawer.
•2 x 4 or 2 x 2 lumber for runners
•2 x 4 or 2 x 2 wood block for
•Saw
•Level
•Drill and 1/16” bit
•Phillips screwdriver
Runners must be level, rigidly mounted and capable of supporting 150 pounds.
3