Geemarc AMPLI500 manual Area and Long Distance Code Setting

SETTINGS

Area and Long Distance Code Setting

When you use your phone for the first time or if you have moved to a different area code, you need to enter your area code into the phone. This assures that when dialing a call out of memory or your phonebook, the number is formatted properly. To set your area code & LDS Code:

Press MUTE

Use ▲ or ▼ to select ‘SET PHONE’

Press OK

Use ▲ or ▼ to select ‘SET AREA & LDS’

Press OK

Use ▲ or ▼ to enter your area code. The phone accommodates

up to six (6) digits (allows for International codes).

Once you have entered your area code, even if you are not using

all six (6) digits, press the OK button until you reach

the ‘SET LDS CODE’ screen

The LDS Code is your long distance code. In the U.S. your long distance code is 1. The telephone is pre-set for the U.S. (NOTE: Do not change the LDS code unless you are leaving the U.S.)

If you wish to change the LDS, use ▲ or ▼ to enter your LDS code.

Press OK to confirm

Press C to exit

15