Gefen DVI 1600HD OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE DVI 1600HD EXTENDER
DVI 1600HD Extender uses 4 strands of LC terminated fi ber optic cable.•
Single-mode and multi-mode fi ber optic cable types are both supported.•
DVI and HDMI modes (for HDCP) are available and are selectable via a • switch located on the front panel of the DVI 1600HD sender unit.
Analog stereo RCA , digital S/PDIF, and digital TOSLINK inputs are all • available for input but only one is selectable for transmission to the receiver.
The selected audio input will be replicated out of all three audio outputs on
the receiver unit.
HDMI mode supports HDCP with resolutions up to 1080p Full HD. Both • single and multi-mode cables are supported at distances up to 650 feet (200
meters).
DVI mode does not support HDCP with resolutions up to 1920 x 1200. • Both single-mode and multi-mode cables are supported. Multi-mode fi ber
can support distances of up to 1640 feet. Single-mode fi ber can support
distances of up to 6560 feet (2 kilometers).
HDMI 1.2 compliant.•
2
OPERATION NOTES