Gefen EXT-DVIRS232-1FO user manual DIP 2 Deep Color, DIP 3 Calibration Mode

DIP SWITCH CONFIGURATION

DIP 2 - Deep Color

NOTE: DIP switch 2 is only functional when DIP switch 1 is set to the OFF position.

•OFF - Enables Deep Color support (12-bit color)

Enables Deep Color support. In Pass-through EDID Mode, setting DIP 2 to the OFF position has no effect since all EDID information is passed through.

•ON - Forces 8-bit Color

Disables Deep Color in the EDID. Deep Color management is only available when Local EDID is being used.

DIP 3 - Calibration Mode

•OFF - Enables Calibration Mode

Enables Calibration Mode. Make sure to set DIP switch 3 on both the

Sender unit and Receiver unit when calibrating the Extenders. See page 12 for details.

•ON - Calibration Mode Lock

Locks the calibration settings. Set DIP switch 3 on both the Sender unit and Receiver unit to the ON position after the calibration process has completed. See page 12 for details on the calibration process.

10