Gefen EXT-PS5-8R Connecting And Operating The Power Rack, How to Connect the Power Rack

Models: EXT-PS5-8R

1 14

Page 9

1.Connect up to 8 power output cables (8 are included) to the Power Rack 58 unit.

2.Connect the opposite ends of the power output cables to compatible Gefen products.

NOTE: The amperage draw of each connected device must not exceed 2.5A.

3.Connect the included 24V DC power supply to the power receptacle on the Power Rack 58. Connect the power plug into an available power source.

No further conﬁguration is necessary to operate the Power Rack 58.

Image 9

Contents

Power Rack EXT-PS5-8R User ManualTechnical Support ASKING FOR ASSISTANCETechnical Support Hours Write To1 Introduction 2 Operation Notes 3 Features 4 Panel Layout CONTENTS5 Panel Descriptions 6 Connecting And Operating The Power Rack 7 Speciﬁcations 8 WarrantyINTRODUCTION The Gefen Power RackGefen How It WorksOPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE POWER RACKFEATURES FeaturesPackage Includes PANEL LAYOUT Front PanelBack Panel 3 24V DC Power Receptacle 2 Main Power LED4 Power Output Receptacles PANEL DESCRIPTIONSCONNECTING AND OPERATING THE POWER RACK How to Connect the Power RackHow to Operate the Power Rack Power Output Voltage SPECIFICATIONSPower Input Voltage DimensionsWARRANTY PRODUCT REGISTRATIONunder the Support section of the Gefen Web site Page Page This product uses UL listed power supplies Rev A520600 Nordhoff St., Chatsworth CA