OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE USB 400 FO
This equipment provides outstanding extension facilities for any device or USB application that requires a peripheral connection over a distance, such as a USB camera or USB hard drive, keyboard, and mouse.
The USB 400 FO works like a USB hub with extension capabilities over a distance of up to 1,640 feet. This means, for example, that a remote USB sensor can be placed at a safe distance from the sender unit in situations that demand this type of security.
The USB 400 FO signal controls the keyboard, mouse, trackball, and other USB peripherals using send and receive units. The USB signal is extended by using
The USB 400 FO uses dual
FCC Radio Frequency Interference Statement Warning
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
Requirements:
To complete the installation, you will also require the following items that are not included with the product:
•USB 1.1 or 2.0 Compatible computer (host computer) with a USB compliant operating system
•USB 1.1 or 2.0 Compatible device
•
The Sender Unit and Receiver Unit are interconnected by up to 500 meters of
fiber optic cabling. Two strands of 50/125μm (1640 feet max.)
subsystem must provide a duplex connection with crossover, and must be
terminated with Duplex LC connectors at both ends.
2
