Troubleshooting & Support
Warning Messages
Message | Solution |
OUT OF RANGE | The input signal is not acceptable by the monitor. |
| - Please ensure that the video resolution and refresh |
| rate of the graphics card in your computer are |
| within specified ranges for the monitor. |
| - Please check your computer’s display settings and |
| change the screen refresh rate properly. For |
| Windows users, press the Advanced button on the |
| Settings tab of Display Properties Window. And |
| then, change the refresh rate of Monitor settings |
| on the Monitor tab to 75Hz. |
| - Please refer to the “Technical Information” |
| section of this User’s Manual to see supported |
| frequency ranges. |
|
|
NO SIGNAL | No signal inputs are detected from the VGA |
| connector. |
| - Check that your computer is ON. |
| - Check that the video signal cable is properly |
| connected. |
| - Ensure that no pins are bent or pushed in the |
| video input connector. |
|
|
AUTO CONFIG | The monitor is detecting the input signal and |
| automatically adjusting the monitor settings. |
| - It takes approximately 5 seconds to finish the |
| entire process. |
| - It is recommended that you |
| pressing the Auto button every time you change |
| the resolution or refresh rate. |
|
|
35
