DoubleSight Displays DS-15xx user manual Computer1 Computer2

User’s Manual

NOTE

If your computer does not specify VGA 1 and 2, you can change the order later using your computer display setting or monitor On-Screen Display setting. Refer to the “Setting Up Computer Display Properties” of this section and “Source Select” of “Key Function Controls” section of this User’s Manual.

If your computer has only one VGA port, you will need to install an additional graphics card to support a dual monitor. Refer to the “Troubleshooting & Support” section of this User’s Manual for details. Additionally, DoubleSight may be connected to two separate computers by attaching one VGA cable to each computer.

Computer1

Computer2

With the two VGA signal cables connected to the computer, turn on the computer. Press the power switch on the monitor. The display should appear.

NOTE

If this is the first time for a dual monitor configuration with your computer, you may need to set up your computer display properties. Refer to the next section. If no display appears even after setting up your computer display properties, refer to the “Warning Messages and Troubleshooting Checklist” in the “Troubleshooting & Support” section of this User’s Manual.

14 Setting Up Your Monitor