TP-Link TL-WA901ND manual Wireless Settings, Wireless menu

TL-WA901ND300Mbps Wireless N Access Point User Guide

Figure 4-9 Wireless menu

4.6.1 Wireless Settings

Selecting Wireless > Wireless Settings will enable you to configure the basic settings for your wireless network on the screen below (Figure 4-10).This page allows you to configure the wireless mode for your device. Six operation modes are supported here, including Access Point, Multi-SSID, Client, WDS Repeater, Universal Repeater and Bridge with AP. The available setting options for each operation mode are different from those of the other.

1)Access Point: This mode allows wireless stations to access this device.

Figure 4-10 Wireless Settings in Access Point mode

Wireless Network Name - Identifies your wireless network name. Create a name up to 32 characters and make sure all wireless points in the wireless network with the same SSID. The default SSID is TP-LINK_XXXXXX (XXXXXX indicates the last unique six characters of each device’s MAC address). This value is case-sensitive. For example, TEST is NOT the same as test.

Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the device can be used. It may be illegal to use the wireless function of the device in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance.

27