TL-WA901ND 300Mbps Wireless N Access Point User Guide
Note:
Limited by local law regulations, version for North America does not have region selection option.
Channel - Determines the operating frequency to be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.
Mode - Select the desired wireless mode. The options are:
•11b only - Only 802.11b wireless stations can connect to the device.
•11g only - Only 802.11g wireless stations can connect to the device.
•11n only - Only 802.11n wireless stations can connect to the device.
•11bg mixed - Both 802.11b and 802.11g wireless stations can connect to the device.
•11bgn mixed - All 802.11b, 802.11g and 802.11n wireless stations can connect to the device.
Channel Width - Determines the channel width to be used. It is unnecessary to change the default value unless required.
Enable Wireless Radio - Select or deselect this check box to allow or deny wireless stations to access the device.
Click the Survey button to detect the SSIDs in the local area.
Note:
To apply any settings you have altered on the page, please click the Save button, and then you will be reminded to reboot the device.
36
