TL-WA901ND
300Mbps Wireless N Access Point User Guide
Appendix C: Troubleshooting
T1. How do I restore my Access Point’s configuration to its factory default settings?
With the Access Point powered on, use a pin to press and hold the WPS/RESET button on the rear panel for more than 8 seconds before releasing it.
Note:
Once the Access Point is reset, the current configuration settings will be lost and you will need to reconfigure the Access Point.
T2. What can I do if I forget my password?
1)Try to use the default user name and password: admin, admin;
2)Referring to the file that you have saved in step 6 of 3.1 Quick Setup last time you configured the device, the file will show you the user name and password that you have configured.
3)If the password is still not the correct one, then you can try to restore the Access Point’s configuration to its factory default settings referring to previous section T1 and try to reconfigure your AP by following the instructions in 3.1 Quick Setup.
T3. What can I do if I cannot access the
1)Please check to see if you have input the correct address http://tplinkap.net in the address bar of your browser.
2)Please make sure your hardware connection is OK. You can confirm this by the LAN LED on the front panel of
3)Make sure your wired device’s IP address is set as “Obtain an IP address automatically”.
4)If the problem still persists, please feel free to contact our technical support.
69
