GEM 419C manual Hazard Signals

Models: 419C

1 155
Download 155 pages 16.43 Kb
Page 54
Image 54

FEATURES AND CONTROLS

Console

Main Disconnect Switch

Move the switch to the left (OFF) to disconnect the battery pack from the motor. After the switch is turned off, some power may remain in the system until all capacitors have dis- charged.

NOTICE: Do not turn off the disconnect switch while the vehicle is in motion or undergoing recharge except in emergency situations.

NOTICE: Damage to electrical connections and components will occur if they are unplugged before the main disconnect switch is turned off. Always turn off the main disconnect switch before servicing or unplugging any electrical components.

Hazard Signals

Press the hazard signal switch to cause all turn signal lamps

 

to flash simultaneously. Use this feature to alert others of

 

an emergency or other situation requiring caution, espe-

 

cially if your vehicle becomes disabled on or near a road.

Hazard Switch

Press the switch again to cancel the hazard signals.

53

Page 54
Image 54
GEM 419C manual Hazard Signals