Features and Controls

1.Turn the main disconnect switch off.

2.Set the battery charger to the medium amp setting (10 to 30 amps).

3.Charge each battery for 10-20 minutes.

4.Move quickly from battery to battery, as this is only a residual charge and it will dissi- pate in a short period of time.

5.After charging the last battery, remove the off-board charger leads, turn the main discon- nect switch on and plug the vehicle in.

6.If the on-board charger does not recognize the residual charge and activate, repeat the alternate charging method.

GEM 419C manual Features and Controls