FUNCTION MENU
By pressing A followed by the the appropriate key, (do not press simultaneously) these special functions and
features can be enabled:
Easy Arm (when system is disarmed)
The Easy Arm feature allows the system to be armed by pressing Afollowed by 0. This will allow the easy arming of the system by someone who is not a regular system user.
Easy Exit (when system is armed)
This function (if programmed) allows an occupant to leave the premises without disarming the system. Pressing A followed by 0 while the system is armed will start a
Bell / Battery Test
Pressing Afollowed by 1will cause the bell, or siren to sound for 2 seconds. This will also initiate a test of your battery to make sure it is adequately charged. The P800 also performs an automatic battery test every 24 hours.
Access Output
If programmed, pressing A followed by 3 will activate the Access Output which may be configured to open a door strike, turn on lighting, or activate some other special feature your installer has provided.
Display System Trouble
Pressing Afollowed by4when TROUBLE His lit will cause the system to display any current system troubles. Pressing Ewill exit the Display System Trouble Mode.
Chime Mode On / Off
Pressing Afollowed by 5will activate / deactivate the door chime. Activating this feature will cause any door to beep the keypad sounder when it is opened.
Program Mode
Pressing Afollowed by8will enable the “Program Mode”, which will allow you to program and erase user codes. (see Programming user codes, page 14).
Keypad Sounder On / Off
Pressing Afollowed by 9will deactivate / activate the keypad sounder, depending on its present state. By deactivating the sounder on a keypad installed in a bedroom, for example, you will only turn off that keypad’s sounder. All other keypads on the system will still sound normally.
11
