Gemini GEM-RP8 manual Keypad Controls & Indicators, Gemini

KEYPAD CONTROLS & INDICATORS

Fire Alarm Light Iwill flash and the Keypad sounder will beep when system is in a Fire Alarm Condition (See Silencing a fire Alarm, Page 8)

Trouble Light Hwill light and the Keypad sounder will pulse to indicate that a system trouble is present. (See System troubles, Page 12)

Status Light will light when all zones are secure and system is ready to be Armed.

Armed Light will light when system is Armed, and will flash when system is in Alarm

Press Afollowed by the corresponding

Function number to enable special functions and options. (See Special Functions, Page 11)

	Zone Lights (1 through 8) will light to indicate		AC Light will light to indicate
that the corresponding Zone is open, and will		that AC Power is present.
flash to indicate a zone in alarm.

Press E

GEMINI									to bypass all
		2	3	4	5	6	7	8	interior
I	1								protective
H									devices such
									as motion
A 1 2 3 J E									sensors, etc.
									Press D
B 4 5 6								G
C 7 8 9 0									after entering
									User Code
COMPUTERIZED SECURITY									when Arming
									or Disarming
									System.

To Bypass a zone, press Band the zone

number to be bypassed, and then Arm system.

Press Cto reset Fire Zone, clear miss- entered codes, reset Alarm Memory, etc.

Numerical Keys 1-9, 0. Used to enter User Codes, Zone numbers, etc.

Emergency Keys Press simultaneously to signal an emergency condition.

Press 7+Gfor Fire Emergency, 8+Gfor Auxiliary Emergency or 9+Gfor Police Emergency.

(Programmable)

Press

Fto

remove entry delay from the Exit/ Entry door.

4