ARMING: PROTECTING YOURSELF AT HOME
Protecting Yourself While at Home
1Before arming your system, make sure the green Status light is ON. This indicates that all of your protective zones are secure. If any zones are open, the corresponding zone number will be lit. Secure those zones before proceeding.
2Enter your User Code and press D. The green Status light will go out, and the red Armed light will light.
3Before your exit delay expires, press Bto bypass any interior zones, deactivating devices such as motion sensors, and allowing free movement throughout the premises. The Zone light of any bypassed zones will flash slowly.
Your system may have been programmed for Automatic Interior Bypass, in which case it will recognize that you have not left the premises and will automatically bypass any interior zones.
Instant Mode
Pressing Fwill cancel the Entry delay, activating the “Instant” mode. This is typically done in the evening when all family members are home for the night. Instant Mode can be activated at any time after the system has been armed. The red Armed light will flash rapidly while in the Instant Mode.
Easy Exit (optional)
Your System may have been programmed to allow Easy Exit, which allows a user to exit the premises with the system armed. By pressing Afollowed by 0, the protection is removed from the Exit/ Entry zone for 3 minutes.
This will allow, for example, an early morning commuter to exit the house in the morning, without having to disarm and rearm the system, waking the family.
Arming with a System Trouble Present (TROUBLE His lit)
If the
6