Gemini GEM-RP8 manual Table Of Contents, System Information, Central Station Communication Test

TABLE OF CONTENTS

TABLE OF CONTENTS
KEYPAD CONTROLS & INDICATORS	4
ARMING: SETTING THE ALARM WHEN LEAVING	5
ARMING: PROTECTING YOURSELF AT HOME	6
EMERGENCY CONDITIONS	7
TURNING OFF THE ALARM (DISARMING) WHEN RETURNING	8
FIRE PROTECTION	9
FUNCTION MENU	11
SYSTEM TROUBLES	12
PROGRAMMING (OPTIONAL)	14
GLOSSARY	15
LIMITED WARRANTY	16

System Information

Central Station Phone Number:___________________

Central Station Account Number: _________________

For Service Call: ______________________________

Entry Delay: __________________________________

Exit Delay: ___________________________________

Alarm Time-out: _______________________________

Important - Test Your System Weekly!	3 Central Station Communication Test
1 Bell / Battery Test	This test should only be performed			on weekends or at a time
	designated by your alarm company.
Test your bell or siren by pressing Afollowed by 1.	1.	Notify Central Station of the impending test.
	2.	Secure all zones to light the Status Light on your keypad.
This will cause the bell, or siren to sound for 2 seconds and also	3.	Enter your User Code followed by Dto Arm the system.
initiate a test of the battery.
2 Zone Test	4.	Violate your alarm by opening a window / door etc.
	5.	The siren or bell should sound and the system will send the alarm
Walk throughout the premises, opening each protected door or		signals to the Central Station.	D
	6.	Enter your User Code followed by			to silence the alarm.
window, and activating each motion sensor. Check the keypad to
see that each respective zone number displays in the window.	7.
		Call Central Station to insure that the alarm signals were received
		properly.
						3