HSYSTEM TROUBLES
The Control Panel is constantly monitoring its own components, as well as all critical services, such as AC power and the telephone line, to insure that it is always ready to provide the protection for which it was designed. When a system trouble does occur, it will caution you by lighting the TROUBLE Hlight and beeping the keypad buzzer.
If you cannot immediately clear the system trouble, the system can still be used. Simply press Afollowed by 4to view the trouble as described below, and then arm the system.
To determine the nature of the trouble, press Afollowed by 4, count the number of keypad beeps and observe the number of the illuminated zone. Refer to the following table to determine the cause of the trouble. If there is more than one trouble to view, pressing Ewill scroll to the next trouble, and then exit the TROUBLE Hmode if there are no more troubles to view.
Keypad Beeps or | Zone light | System Trouble | Action |
HFlashes | ON | Condition |
|
|
|
| |
1 Beep | 1 | AC Power Failure | This trouble will occur if AC power is not present. Make sure system transformer is |
|
|
| plugged into AC receptacle and check the circuit breaker, otherwise call installing |
|
|
| company for service. |
1 Beep | 2 | Low Battery | If there has been a recent power failure, the battery may be partially depleted and must |
|
|
| be recharged by the control panel. If the trouble does not go away in 24 hours, call |
|
|
| installing company for service. |
1 Beep | 3 | Communication | The system was not able to report to central station. If this is due to a temporary |
|
| Failure | interruption in the telephone service, the trouble can be cleared when the service is |
|
|
| restored by pressing Afollowed by4again to view the trouble, and then |
|
|
| pressing Eto exit. Otherwise, call installing company for service. |
1 Beep | 4 | Telephone Line Cut | The telephone line has failed. If telephone service has been temporarily interrupted, |
|
|
| the trouble will clear it is when restored. Otherwise, call installing company for service. |
2 Beeps | 1 | Bell/Siren Trouble | There is a problem with the Bell or Siren. Call installing company for service. |
12