Section 6 – Installation
PRIMEPACT 66G and 66LP Recreational Vehicle Generators
• | Vapor seal all compartment seams and joints. | Figure 6.7 – Typical Noise Abatement | |||||||||||||
• | Over the galvanized steel lining, install a combination |
|
|
|
|
|
|
|
| ||||||
| of acoustical materials as mentioned in Section 6.2.3. |
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To prevent fire or explosion, do not install any insulation or other absorbent materials on the interior or underside of the compartment floor.
• Seal all compartment door edges to prevent noise leakage around the door perimeter.
• Line the compartment door interior (except for air openings) with suitable, fireproof sound insulation (such as
Figure 6.8 — Compartment Floor Cutout
Generac® Power Systems, Inc. 25
