TROUBLESHOOTING cont. 15
TROUBLESHOOTING cont.
T= Trouble C= Countermeasure
T. How do I reverse the cutter drum rotation?
C.Refer to the Adjustments and Maintenance section of this manual for information on reversing the hydraulic hoses at the motor to reverse the cutter drum direction.
T. How do I replace my knives?
C. Refer to the Adjustments and Maintenance section of this manual for information regarding the replacement of knives.
T.When connecting my hydraulic hoses, is there a specific way they should be at- tached or can any hose go to any fitting on the operating vehicle?
C.Make sure the engine is turned off and all the functions have been cycled to insure all hydraulic back pressure has been relieved. You will notice that one hose has a female end and the other hose has a male end. The female hose attaches to the male fitting on the operating vehicle and vice versa. Refer to the Basic Operation section of this manual for further information regarding plumbing.
T. I keep blowing the seals on my 40EXT and cannot seem to resolve the issue. What should I do?
C.The main cause of seal ruptures with this machine is a result of high pressure re- turn problems. In order to eliminate these problems, let the operating vehicle warm up for at least
NOTE: Consult your KX080 excavator manual to insure lift capacities are not ex- ceeded. K4080 features custom bolt on hitch mounting to match your existing buckets. Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual before using the equipment. Pay close attention to all safety and operating decals and never operate machinery without all shields, protective devices and structures in place. Design, materials and/or specifica- tions are subject to change without notice and without liability therefore. Specifications are applicable to units sold in Canada, the United States, its territories and posses- sions, and may vary outside these areas.
