External Electrical Connections
Drill a 1¾ inch hole and feed the conduit through the hole.
Remove the knockout in the back of the connection box, feed the wires through the back of the box and secure the conduit with the lock nut.
Seal the hole with silicone caulk. Don’t forget to caulk the hole inside the house as well.
Mount the connection box so that it completely covers the hole in the wall.
Connect all wires to the lugs in the connection box (black to black, red to red and white to white). Attach the green ground wire to the ground screw and connect the two ends of the
Replace the protective cover plate …
… and lock the connection box.
10
