![Converting To LP Vapor](/images/new-backgrounds/51124/5112415x1.webp)
Check the engine oil, and if necessary, add enough of the recommended oil to bring the level up to the FULL mark on the dipstick. Be careful not to overfill the crankcase.
Converting To LP Vapor
The generator was configured for natural gas operation at the factory. Switching over to LP vapor is a simple procedure.
On models with the
On models with a
Disconnect the two wires from the solenoid and remove the fuel hose from the outlet port.
Remove the steel plug from the number one outlet port and the brass fitting for the fuel hose from the number two port.
Using a quality sealant on the threaded fittings, install the brass fitting in port one and the steel plug in port two.