WARNING: Never attempt to sand the ends of a work piece on the idler drums. It could cause the work piece to fly up and result in personal injury.
Always sanding the outside curve on the left hand side of the sanding disc, as shown in FIG 20
WARNING: Sanding the work piece on |
|
the right side of the sanding disc could cause |
|
the work piece to fly up and result in personal |
|
injury. | FIG 20 |
|
MAINTENANCE
CLEANING
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING: Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
Electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to accelerated wear and possible premature failure because the fiberglass chips and groundings are highly abrasive to bearings, brushes, commutators, etc. Consequently, we do not recommend using this tool for extended work on these types of materials. However, if you do work with any of these materials, it is extremely important to clean the tool using compressed air.
LUBRICATION
This tool is permanently lubricated at the factory and requires no additional lubrication.
English
TWO-YEAR LIMITED WARRANTY
This product is warranted free from defects in material and workmanship for 2 years after date of purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to returning your tool to store location of purchase, please call our
TOLL-FREE HELP LINE
For questions about this or any other GENESIS Product,
Please call
www.richpowerinc.com
13
