Programming Limits & Force, Close Door Travel Limit

1 PROGRAMMING LIMITS & FORCE

(Continuing from Installation Poster if provided)

SETTING & TESTING LIMITS AND FORCE

The OPEN (UP) and CLOSE (DOWN) Door Limit positions are controlled by making adjustments using the panel located on the bottom of the powerhead. Begin with Step 1 and continue through Step 10. Door Force is set during the final Open/Close cycle of these steps. The powerhead will automatically set door speed at slow if the distance between limits is less than 6 feet. Once Limits and Force are set DO NOT use the or buttons to open or close door.

WARNING

•Make sure doorway is in view and clear of obstacles and people to avoid injury or damage to property.

•DO NOT operate this unit from wall console before LIMITS and FORCE are set. Severe damage to the opener can occur.

•The bullet MUST be engaged to carriage BEFORE setting limits. See Installation Poster (if provided) or refer to pages 11 and 19.

Genie Company

A) CLOSE DOOR TRAVEL LIMIT

NOTE: If bullet has NOT been engaged to the carriage, do so now.

Please note that there is a 30 second timeout between each programming step.

A programming timeout during these steps has occured when two RED flashing LEDs appear.

In the event of a timeout please restart at Step 1.

1PRESS and HOLD

PROGRAM		—	+
			+
	SET
	SET

SEE BOTH Blue LEDs come ON

RELEASE

SEE round

Blue LED come ON

3PRESS and RELEASE

PROGRAM	—	+

SEE long Blue

LED come ON

If RED LED comes ON - STOP and

exit programming.

4	NOTE: If one or both LEDs come ON RED
	at this time, Limits programming menu
12/2010	was not entered properly. You must exit
	To exit the programming function wait 30
	programming and restart.
	seconds for the programming to time out.

		PROGRAM		—
PRESS and			SET

RELEASE

SEE round Blue LED flashing

5PRESS and HOLD until door is FULLY CLOSED then RELEASE

OGRAM		—	+
			+
	SET
	SET

Watch door move

NOTICE

NOTE: You can start and stop door

movement using either buttons until door is in correct open or closed position.

3024H, 3024 specifications

The Genie 3024 and 3024H are part of Genie’s renowned line of compact scissor lifts, designed primarily for vertical access to elevated workspaces in various environments. With a remarkable blend of performance and ease of use, these models cater to the needs of contractors, maintenance crews, and facility managers alike.

One of the standout features of the Genie 3024 and 3024H is their impressive working height, which reaches up to 30 feet. This elevates the platform’s capabilities, allowing operators to complete tasks efficiently in tight spaces. The platform itself is spacious, providing ample room for tools and materials, which enhances productivity on the job site.

Both models are equipped with Genie’s patented Fast Mast technology, enabling users to elevate the platform quickly to the desired height while keeping the base on the ground. This feature significantly reduces downtime, making it easier for operators to complete tasks efficiently without unnecessary delays. This characteristic is especially beneficial in industries where time is of the essence.

The Genie 3024 and 3024H also come with a robust electric drive and hydraulic system, ensuring smooth and reliable operation both indoors and outdoors. Their compact size and tight turning radius allow them to navigate through narrow aisles and doorways with ease, making them ideal for use in warehouses, retail spaces, and smaller construction sites.

The models are designed with safety and stability in mind. They include features such as non-slip surfaces on the platform, automatic cut-off systems, and guardrails to ensure secure usage during operation. Additionally, the units are equipped with integrated wheel brakes that enhance safety when the lifts are stationed in elevated positions.

The Genie 3024H variant offers added flexibility with its high-capacity battery system, providing extended work cycles without the interruption of recharging. This makes the 3024H particularly suitable for extended job sites and projects where access to power might be limited.

In summary, the Genie 3024 and 3024H scissor lifts deliver an array of features that enhance both performance and safety, making them invaluable tools for anyone needing reliable vertical lift solutions. With a focus on compact design, quick operational capabilities, and enhanced safety measures, these models exemplify Genie’s commitment to meeting the evolving needs of the construction and maintenance industries.

Genie 3024H manual Programming Limits & Force, Close Door Travel Limit

Models: 3024H 3024