Genie 48643 Emergency Stop, Platform Raise & Lower, Manual Lowering, Auxiliary Platform Lowering

Operator’s Manual Second Edition • Fourth Printing

OPERATING INSTRUCTIONS

Emergency Stop

1Push in the red Emergency Stop button at the platform controls or at the ground controls to stop the up function.

Platform Raise & Lower

1Twist to release the red Emergency Stop button at the platform controls.

2Push in the control activate button and rotate the up/down switch in the desired direction of travel.

ANSI & CSA CE

a b a b

acontrol activate button

bup/down switch

Manual Lowering

1Activate the manual lowering valve located

at the bottom of the hydraulic cylinder.

Auxiliary Platform Lowering

1Turn the key switch to ground control (if equipped).

2Activate the auxiliary platform lowering button at the ground controls.

After Each Use

1Select a safe storage location—firm, level surface, weather protected, clear of obstruction and traffic.

2Pull the base lowering handle to lower the base until all four foot pads are in firm contact with the ground.

3Remove the key to secure from unauthorized use.

4DC models: Recharge battery.

18 Genie IWP Super Series Part No.48643