Operator’s Manual | Second Edition • Fourth Printing |
|
|
|
|
SAFETY RULES
Tip-over Hazards
Do not raise the platform unless the machine is on a firm, level surface.
Do not move the machine while the platform is raised.
Do not cause a horizontal force or side load to the machine by raising or lowering a fixed or overhanging load.
Do not place or attach overhanging loads to any part of this machine.
Do not place ladders or scaffolds in the platform or against any part of this machine.
Do not push off or pull toward any object outside the platform.
Maximum allowable | 45 lbs |
manual force | 200 N |
|
|
Do not use the machine to lift material or equipment. The machine is intended to lift personnel and tools to an aerial work site.
Do not operate the machine near
Do not use the machine on a moving or mobile surface or vehicle.
Do not alter or disable machine components that in any way affect safety and stability.
Do not operate the machine in strong or gusty winds. Do not increase the surface area of the platform or the load. Increasing the area exposed to the wind will decrease machine stability.
Do not exceed the rated platform load capacity.
Maximum capacity - |
|
|
|
ANSI & CE | 350 | lbs | 159 kg |
|
|
|
|
Maximum capacity - |
|
|
|
CSA | 300 | lbs | 136 kg |
|
|
|
|
Maximum capacity | 300 | lbs | 136 kg |
|
|
| |
|
|
|
|
Maximum occupancy |
|
| 1 person |
|
|
|
|
2 | Genie IWP Super Series | Part No.48643 |
