Second Edition • Fourth Printing | Operator’s Manual |
|
|
|
|
Do not replace items critical to stability with items of different weight or specification.
When moving the machine with a forklift or other transport vehicle, the platform should be fully lowered, the machine should be turned off and no personnel shall remain in the platform.
Do not install the outreach option on an
Fall Hazards
Do not sit, stand or climb on the platform guard rails. Maintain a firm footing on the platform floor at all times.
Do not exit the platform while raised. If a power failure occurs, have ground personnel activate the manual lowering valve.
Keep the platform floor clear of debris.
Lower the platform entry
SAFETY RULES
Electrocution Hazards
This machine, even with an optional fiberglass platform, is not electrically insulated and will not provide protection from contact with or proximity to electrical current.
Keep away from the machine if it contacts energized power lines or becomes electrically charged. Personnel on the ground or in the platform must not touch or operate the machine until energized power lines are shut off.
Maintain safe distances from electrical power lines and apparatus in accordance with applicable governmental regulations and the following chart.
Voltage | Minimum Safe | |
| Approach Distance | |
|
|
|
Phase to Phase | Feet | Meters |
|
|
|
0 to 300V | Avoid Contact |
|
|
|
|
300V to 50KV | 10 | 3.05 |
|
|
|
50KV to 200KV | 15 | 4.60 |
|
|
|
200KV to 350KV | 20 | 6.10 |
|
|
|
350KV to 500KV | 25 | 7.62 |
|
|
|
500KV to 750KV | 35 | 10.67 |
|
|
|
750KV to 1000KV | 45 | 13.72 |
|
|
|
Part No.48643 | Genie IWP Super Series | 3 |
