Sixth Edition · Second Printing | Operator's Manual | |
|
|
|
|
|
|
Pre-operation Inspection
Be sure that the operator’s, safety and responsibilities manuals are complete, legible and in the storage container located in the platform.
Be sure that all decals are legible and in place. See Decals section.
Check for engine oil leaks and proper oil level. Add oil if needed. See Maintenance section.
Check for hydraulic oil leaks and proper oil level. Add oil if needed. See Maintenance section.
Check for engine coolant leaks and proper level of coolant. Add coolant if needed. See Maintenance section.
Check for battery fluid leaks and proper fluid level. Add distilled water if needed. See Maintenance section.
Check for proper tire pressure. Add air if needed. See Maintenance section.
Check the following components or areas for damage, improperly installed or missing parts and unauthorized modifications:
Electrical components, wiring and electrical cables
Hydraulic hoses, fittings, cylinders and manifolds
Fuel and hydraulic tanks
Drive and turntable motors and drive hubs
Boom wear pads
Tires and wheels
Engine and related components
Limit switches and horn
Alarms and beacons (if equipped)
Nuts, bolts and other fasteners
Platform entry
Check entire machine for:
Crack in welds or structural components
Dents or damage to machine
Excessive rust, corrosion or oxidation
Be sure that all structural and other critical components are present and all associated fasteners and pins are in place and properly tightened.
After you complete your inspection, be sure that all compartment covers are in place and latched.
Part No. 1000209 | 13 |
