Sixth Edition · Second Printing | Operator's Manual | |
|
|
|
|
|
|
Test the Machine Functions
7Do not hold the function enable switch to either side. Attempt to activate each boom and platform function toggle switch.
Result: All boom and platform functions should not operate.
8Hold the function enable switch to either side and activate each boom and platform function toggle switch.
Result: All boom and platform functions should operate through a full cycle. The descent alarm (if equipped) should sound while the boom is lowering.
Machines equipped with Platform Level Control Disable Function: The platform level toggle switch will not operate when the primary boom is raised or extended or the secondary boom is raised past the drive speed limit switches.
Test the Tilt Sensor
9Pull out the platform red Emergency Stop button to the on position.
10Turn the key switch to platform control.
11Open the control panel side turntable cover and locate the tilt sensor next to the control box.
12Press down one side of the tilt
sensor.
Result: The alarm, located in the platform, should sound.
FUNCTION TESTS
Test Auxiliary Controls
13 Turn the key switch to ground control and shut the engine off.
14 Pull out the red Emergency Stop button to the on position.
15 Simultaneously hold the auxiliary power switch on and activate each boom function toggle switch.
Note: To conserve battery power, test each function through a partial cycle.
Result: All boom functions should operate.
At the Platform Controls
Test Emergency Stop
16 Turn the key switch to platform control and restart the engine.
17 Push in the platform red Emergency Stop button to the off position.
Result: The engine should turn off and all functions should not operate.
Deutz Diesel models: The engine will shut off after 2 or 3 seconds.
18 Pull out the red Emergency Stop button and restart the engine.
Part No. 1000209 | 19 |
