The default frequency is 98.000 MHz.
To display the frequency push the SETTING key.
In order to display the parameter push the SELECT key.
Display Password
The Password mode is factory set to enable, and is not possible change this setting.
The default password is 1 2 3.
The way for changing the password is the following:
•Press the PROGRAM key for 3 seconds;
PASSWORD
0 1 2 3 4 5 6 7 8 9
PROGRAM
SETTING
•Press the PROGRAM key to move the underscore character position at the required digit, and press the SETTING key to confirm the digit.
PASSWORD *
0 1 2 3 4 5 6 7 8 9
PROGRAM
SETTING
Repeat the same for the two remaining digits.
PASSWORD * * *
0 1 2 3 4 5 6 7 8 9
PROGRAM
SETTING
•If the password is correct press the SETTING key to confirm, otherwise press the PROGRAM key to select again.
