If the password is correct the display will show:
STORED
NEW PASSWORD
PROGRAM
SETTING
If the confirmation password is wrong the display will show:
ERROR
CONFIRMATION
IMPORTANT NOTE
PROGRAM
SETTING
! BE CAREFUL !
Once the password is set, it must be remembered, otherwise neither the frequency nor the password can be reset and the unit will have to be returned to Nicom for resetting.
Display Change of Frequency.
•Press the PROGRAM key for 3 seconds and enter the correct password. At this point press again the SELECT key:
NEW PASS . = SET.
NEW FREQ . = PRG
PROGRAM
SETTING
•Press the PROGRAM key to change the desired digit and press the SETTING key to confirm it.
FREQUENCY ?
MHz 103.900
PROGRAM
SETTING
