Gianni Industries AD-425S instruction manual Input/Output Contact

Input/Output Contact

Explanation

Remark

Jumper 1-2 is N.C. contact.

N. C. (default)

Jumper 1-3 is N.O. contact.

N. O. (default)

Jumper

1-8

is N.C., or using the “OPEN”

switch.

AD-425S becomes automatic mode. When the

connector is N.O. or using the “HOLD” switch, and then

change to manual mode.

Jumper

1-9

is N.O.,

or using the

“GO”

switch.

AD-425S becomes manual mode. When the connector

is N.C. or using the “PUSH” switch, and then change to

automatic mode.

LED (Relay)

Relay(Lock) Action indicator.

See page 3

LED (DC in)

PCB power status indicator.

See page 3

This battery

has

Battery Contact and

LED (Charge) indicates the battery charge is working

an

expected

life

properly. The optimum operating temperature

for

the

of

250

recharge

LED (Charge)

rechargeable battery is 5℃ up to 40 ℃.

cycles

at

full

charge.

BATTERY

Battery Contact.

Battery

Specification

(12

V,1.2 Ah)

LED (Motor)

Motor power status indicator.

See page 3

N. C.

N. C.

is a

normally

closed contact,

and

it

is

for

All GEM electric

locks are

fail-safe (Power to Lock) Electric Locks.

suitable.

N. O.

N. O.

is a

normally

open contact,

and

it

is

for

fail-secure (Power to Open) Electric Locks.

Com.

Com. contact is a dry contact compatible with N. O. and

N. C. contacts.

AC 15V IN

The 15V AC power is transformed from 110 or 220 VAC

by the transformer to the Control Board.

Copyright All Rights Reserved.
P-MU-AD425S Ver. A Publish:2008.07.11	Page: 5/ 20