Manuals / Gianni Industries / Household Appliance / Door

Gianni Industries AD-425S instruction manual Steps

Models: AD-425S

1 20

Download 20 pages 25.33 Kb

Page 15

Manual background

Steps	Figures	Explanation
Step 18.		Tighten screws.

Insert screws (6 x 95 mm) to the Operating Arm on

Step 19.Square See the figure presented for a out-swing door (Right-Hand Open), more details shown in Figure 9.

Step 20.

Tighten nut at other end of screw.

Step 21.

Use the 10mm wrench to tighten nuts.

Step 22.

Insert pin to avoid the screws from loosing.

Step 23.

Slide the Operating Arm to Sliding Rail.

Copyright All Rights Reserved.
P-MU-AD425S Ver. A Publish:2008.07.11	Page: 15/ 20

Image 15

Gianni Industries AD-425S instruction manual Steps

Contents

AD-425S Automatic Door Operator Instruction Manual General Safety PrecautionsManufacturers Declaration Security StatementAll Packing materials 1. Construction Name2. Control Board Motor 3. Control Board GuideFigure 5~8 MotorInput/Output Contact See Figure The opening, closing and maintain -open time illustration tableCurrent See Figure 5. SpecificationPrepare the installation Installation instructionsMount the Operating Arm z Figure 14 Automatic door operator dimension Figure 19 In-swing door Right-Hand Open AD-425S Template Installation InstructionFigure 17 Out-swing door Right-Hand Open Figure 18 Out-swing door Left-Hand OpenInstallation Steps Out-swing door Right-Hand Open Steps Step Step Step Step Step Steps Steps need a Stopper Ball Steps lock Trouble shootingNormal Operation Maintenance every 6 monthsGeneral Safety Precautions Distributor