5.3 Calibrating Media Sensor by Diagnostic Tool
5.3.1Auto Calibration
1.Make sure the media is install ready and print head mechanism is closed. (Please refer to section 3.3.)
Note: The media sensor position is moveable. Please make sure the gap (▽) or black mark is at the location where media gap/black mark will pass through for sensing.
Gap sensor
Black mark sensor
2.Turn on the printer power switch.
3.Open Diagnostic tool and set interface. (The default setting is USB.)
The default interface setting is USB interface. If USB interface is connected with printer, no other settings need to be changed in the interface field.
2
1
4.Click the “Calibrate Sensor” button.
5.Select the media type and click the “Calibrate” button.
1
2
26
