2
6.Close the print head mechanism by both hands and make sure the latches are engaged securely.
7.Use “Diagnostic Tool” to set the media sensor type and calibrate the selected sensor. (Start the
1“Diagnostic tool” Select the “Printer Configuration” tab Click the “Calibrate Sensor” button ) Please refer to section 5.3.
Note:
*Please calibrate the gap/ black mark sensor when changing media.
*Please refer to videos on TSC YouTube or driver CD.
Media loading path
Media bar
Gap sensor
Platen roller
Black mark sensor
Media
Path for outside wound
Path for inside wound
Media guide
10
