Gianni Industries AD-425S instruction manual Security Statement, Manufacturers Declaration

zMake sure the voltage specified as correct for the device.

zMust provide at least 10 seconds rest time between every restarting cycle to ensure adequate residual current can be returned to power system.

zMake sure to turn the power off before installing and checking this unit and to avoid the risk of fingers that are in contact with the electronic components. External interconnection wiring should be performed wearing the antistatic glove.

Security Statement

According to operating instructions, motorized door installer and the manufacturer of the machinery have the same obligations:

zThe technical documents and the annex to the AD-425S Automatic Door Operator must be kept and placed at the disposal of competent national authorities for at least 5 years from the manufacturing dates. CE attestation of conformity should deliver it to the customers.

zShould you have other queries, please refer to the http://gianni.tw to download AD-425S full details and other relevant documentations.

Manufacturer's Declaration

Gianni Industries, Inc.

Address: No. 306-1 Hsin Shu Road, Hsin Chuang, Taipei, Taiwan 242

E-mail:info@gianni.com.tw

http://gianni.tw

Herewith declares that AD-425S Automatic Door Operator for swing doors: (One way direction only.)

zAD-425S Automatic Door Operator can not be installed with other mechanism except electric door locks.

zConformity with other CE directives: Electromagnetic Compatibility Directive 2004/108/EC（EN61000-6-1、EN61000-6-3 、EN61000-3-2、EN61000-3-3）

zProduct life: 5 years

zProduct should be operated under the recommended door weight. A reduction in performance is to be expected when the access is made to operate at the maximum permissible weight.

zService class, product operation times and the number of consecutive cycles have been statistically analyzed to determine under average operating conditions, and it does not represent for use under a special condition. (See Figure 1)

zThe characteristic performance of door operation may be affected by different independent variables like friction, offset (balancing), environmental factors and so on. These factors may change the performance of the door operator’s working life or parts. Furthermore, the assembly must be considered and enables infinite durability and continuous operation.

Copyright All Rights Reserved.
P-MU-AD425S Ver. A Publish:2008.07.11	Page: 2/ 20