Giantec 2000 manual Z Setting, RS485 RS422 RS232

Tracer 2000 DVR user manual

P/T/Z Setting

The P/T/Z Setting complies with LILIN or PELCO. Protocol has been previously attached to the COM ports. You may control the camera via arrow buttons. In this case, you don’t need to buy dedicated P/T/Z controller.

Pin assignment of COM2：

Connect 9 PIN Female D_SUB to COM2 (Pin defines as below)

Cable connection：Camera Input jack to COM2 for PIH-7000/7600：

For example:

Jumper setting of COM2：

The system default of COM2 is RS-485. Adjust Jumper JP3 in system for RS-422,RS-232 signals as shown below.

JP3 JP3 JP3

1

21

21

2

17

18 17

18 17

18

RS485 RS422 RS232

Version 3.0 Page 22 of 36