English
SATA/RAID/SCSI Boot Order
This function will available when Boot up device set at "SCSI".
This feature allows you to select the boot order Serial ATA, RAID or SCSI device.
SCSI | Select your boot device priority by PCI SCSI. |
RAID | Select your boot device priority by RAID. |
SATA | Select your boot device priority by Serial ATA. |
BootUpFloppySeek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is 40 tracks 720K, 1.2M and 1.44M are all 80 tracks.
Enabled | BIOS searches for floppy disk drive to determ ine it is 40 or 80 tracks. Note |
| that BIOS can not tell from 720K, 1 .2M or 1.44M drive type as they are all |
| 80tracks. |
Disabled | BIOS will not search for the type of floppy disk drive by track num ber . Note |
| that there will not be any warning m essage if the drive installed is 360K. |
| (Default value) |
FlexibleAGP 8X
Auto | Autom atically set AGP transfer rate according to AGP com patibility and |
| stability. (Default value) |
4X | Set AGP transfer rate to 4X m ode no m atter what the AGP transfer rate the |
| card is. |
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you install an AGP card and a PCI VGA card on board.
PCI | Set initial display first to PCI slot. (Default value) |
AGP | Set initial display first to AGP. |
GA-7N400E( | - 38 - |
綳蘹鵖 鞢鏒 | 齇 | 飀 | 蠖韙櫡曚垾陼 | 韗む |
