Gigabyte GA-7VA manual Frequency/Voltage Control, English, FSpread spectrum Modulated

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2003 Award Software

Frequency/Voltage Control

Spread spectrum Modulated	[Auto]	Item Help
CPU Host Clock Control	[Disable]	Menu Levelu
øCPU Host Frequency(MHz)	100
øPCI/AGP Frequency(MHz)	33/66
DRAM Clock(MHz)	[Auto]
CPU Voltage Control	[Auto]
AGP OverVoltage Control	[Auto]
DIMM OverVoltage Control	[Auto]

higf: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults

Figure 8: Frequency/Voltage Control

øThose items will be available when "CPU Host Clock Control" is set to Enabled.

FSpread spectrum Modulated

8Auto	Set clock spread spectrum by auto.
8Disabled	Disable clock spread spectrum.
8Enabled	Enable clock spread spectrum.(Default value)

FCPU Host Clock Control

Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot . When time out occur, system will reset and run at CPU default Host clock at next boot.

8Disable	Disable CPU Host Clock Control.(Default value)
8Enable	Enable CPU Host Clock Control.

FCPU Host Frequency (MHz) (By switch SW1)

8100	Set CPU Host Clock to 100MHz~132MHz.
8133	Set CPU Host Clock to 133MHz~165MHz.
8166	Set CPU Host Clock to 166MHz~200MHz.

English

- 47 - BIOS Setup